A newly revised standard from ASHRAE and IES seeks to provide greater guidance and a more comprehensive approach to retrofits of existing buildings for increased energy efficiency.
Published this week, ANSI/ASHRAE/IES Standard 100-2015, Energy Efficiency in Existing Buildings, provides comprehensive and detailed descriptions of the processes and procedures for the retrofit of existing residential and commercial buildings in order to achieve greater measured energy efficiency. Appendices are included for life-cycle cost analysis procedures as well as identification of potential energy conservation measures.
The standard addresses both residential and commercial buildings. It addresses single and multiple activity buildings with variable occupancy periods and identifies the approach for 53 building types in 17 climate zones/subzones. It identifies requirements for buildings undergoing retrofits that do not fall under the scope of either ANSI/ASHRAE/IES Standard 90.1-2013, Energy Standard for Buildings Except Low-Rise Residential Buildings, or ANSI/ASHRAE/IES Standard 90.2-2007, Energy Standard for Low-Rise Residential Buildings.
Standard 100 directly addresses a building’s energy-use efficiency in a quantitative manner and provides a means to improve that efficiency with an objective benchmark created with the assistance of the Energy Information Administration, the Federal Energy Management Program and Oak Ridge National Laboratory.
Recognizing that the actual occupancy of the building plays a key role in its performance, the standard establishes the need for development of an energy management plan and an operation and maintenance program. It also addresses the requirements for ongoing commissioning.
The standard takes advantage of the fact that any building that has been in operation for at least twelve months can quickly determine its performance relative to some benchmark, which is defined in the standard as an energy-use intensity target.
The revision of the standard, last published in 2006, also brings the standard in line with other published ASHRAE documents, specifically Standard 90.1-2013, Standard 90.2-2007 and ANSI/ASHRAE Standard 105-2014, Standard Methods of Determining, Expressing and Comparing Building Energy Performance and Greenhouse Gas Emissions.